EANx
Blender
Purpose
- This Program is designed
to train competent personnel in the safe handling of oxygen and the
preparation of EANx.
Prerequisites
- Must have a need to
become a blender (such as working for an EANx training or full service
facility, or if not affiliated with a facility must be a qualified
Advanced EANx Diver and located in a remote area).
- Must be recommended by
an IANTD Instructor or Facility.
- To be qualified to
service specific brands or equipment for EANx use, the blender must be
a Qualified Technician with the manufacturer of the equipment being
serviced.
Texts
- IANTD Gas Blender
Workbook and Manual.
Plus the following is
highly recommended:
- IANTD Nitrox Blending Handbook.
Program Content
- This Program must
include a minimum of 2 hours of hands-on experience preparing EANx.
- A written test must be
passed with a minimum score of 80%, and must demonstrate mixing
capability.
Equipment Requirements
- IANTD-approved mixing
station.
- Oxygen analyzer.
- All equipment used in
this Program must be compatible with the EANx mixtures being prepared
and the method in which the EANx is being blended.
Program Limits
- Blenders may not perform
duties other than cylinder cleaning, visual inspections and gas mixing
unless qualified as a Technician with the manufacturer of the
equipment being prepared for EANx use.
Copyright
©
2006
TEKDIV
Exploration
Email:
sales@tekdiv.com
Phone:
(514)
862-0274
This page was last updated
02/17/07
