Cylinders

FREE SHIPPING
For Complete Pricing information click here

Whether you are looking for the perfect choice in doubles or a new stage cylinder TEKDIV has the technically correct solution for your needs. We offer various packages from single 80's to double 104's including the new PST E-Series, we have stage cylinders pre-assembled and rigged ready to dive. We offer DIN as well as Yoke valves whatever you want. All of our stage and double sets can be delivered to you oxygen cleaned or ready for air only fills. If you do not see what you want listed please call and one of our service representatives will be happy to help you.

PST Steel Cylinders

The AquaAire Pro Low Pressure series is available in four internal capacities an 80 cu.ft, 95 cu.ft, 104 cu.ft, and 120 cu.ft. This series has an operating pressure of 2400 psi with a 10% over fill; maximum service pressure is 2640 psi. Why a lower fill pressure? In some cases a lower fill pressure is required, when diving on charter boats, using personal compressor and the technical diving industry prefers low pressure for safer mix gas blending.

The next question most people asked is "what am I giving up with a LP scuba cylinder " the answer is nothing. This is due PST unique deep drawn steel process. Since steel is stronger than other material used by most companies. Less steel is needed to produce our cylinder. You will notice the Pro Series to be shorter in overall length, lighter in total weight and with preferred buoyancy characteristics. It's just what the diver ordered.

 

 
PART  SPEC SERVICE WATER WATER CAPICITY CAPICITY CAPICITY DIAMETER LENGTH* WEIGHT**

                     BUOYANCY*** 

 NECK
NUMBER (DOT) PRESSURE CAP.(ci) CAP.(lt) @ 3442 PSI @ 3000 PSI @ 2640 PSI INCHES INCHES LBS. EMPTY FULL THD
E7-65 E9791 3442 PSI 505 8.28 65.0 58.9 52.5 7.2 16.75 23.2 -1.5 -6.4 3/4-14 NPSM
E7-80 E9791 3442 PSI 622 10.19 80.0 72.2 64.3 7.2 19.75 26.0 -3.3 -9.3 3/4-14 NPSM
E7-100 E9791 3442 PSI 777 12.73 100.0 89.7 79.9 7.2 24.00 32.0 -1.3 -8.8 3/4-14 NPSM
E7-120 E9791 3442 PSI 933 15.29 120.0 107.7 96.1 7.2 28.00 36.6 -1.3 -10.3 3/4-14 NPSM
E8-119 E9791 3442 PSI 926 15.17 119.0 108.2 96.5 8.0 24.00 39.3 -3.3 -10.4 3/4-14 NPSM
E8-130 E9791 3442 PSI 1013 16.60 130.0 119.1 106.1 8.0 25.56 42.2 -4.8 -12.6 3/4-14 NPSM
E8-149 E9791 3442 PSI 1158 18.98 149.0 137.3 122.5 8.0 29.37 47.5 -1.7 -10.7 3/4-14 NPSM
LP-45 3AA 2640 PSI 437 7.16 NA NA 45.0 5.5 23.00 19.6 -0.5 -3.7 3/4-14 NPSM
LP-80 3AA 2640 PSI 785 12.86 NA NA 80.6 7.2 24.00 34.4 -1.0 -7.0 3/4-14 NPSM
MP-72 3AA 3300 PSI 575 9.42 NA 71.2 58.7 6.9 20.75 30.0 -6.0 -11.4 3/4-14 NPSM

Notes:
(*) LENGTH OF CYLINDER ONLY, NO VALVE
(**) WEIGHT OF CYLINDER ONLY.
(***) WEIGHT INCLUDES CYLINDER, VALVE AND TANK BOOT IN SALT WATER.
ALL CYLINDERS LISTED ARE EXTERNALLY HOT DIPPED GALVANIZED.
MATERIAL USED IS CHROMIUM MOLYBDENUM

Luxfer aluminum cylinders

Luxfer Gas Cylinders

The Luxfer Advantage

  • Proprietary 6061 alloy, a balanced aluminum-magnesium-silicon blend exclusive to Luxfer.
  • Cycle-tested in excess of 100,000 cycles at service pressure.
  • Minimum burst pressure tested to 2.5 times service pressure without failure.
  • Manufactured to all recognized international standards.
  • Corrosion-resistant interior and exterior—unlike corrosion-prone steel cylinders.
  • Full line of capacities from 6 to 100 cubic feet.
  • Nitrox-ready: New Luxfer scuba cylinders are specially prepared at the factory to be suitable for use with oxygen-enriched air mixtures. (It is the responsibility of the cylinder owner to maintain this suitability, including using only Nitrox-compatible components with Luxfer cylinders in oxygen-enriched service.)
  • Consistent weight.
  • Thick, damage-resistant walls.
  • Wide color range available, including fully brushed and shot-blasted.

 
Luxfer Scuba Cylinders 
Sales
Part#
Service
Pressure
Capacity
Air
Outside
Diameter
Overall
Length
Empty
Weight
Minimum
Internal
Volume

Water
Weight
Salt Water Buoyancy
Thread Size
Full Half Empty
PSI
CU FT
IN
IN
LBS
CU IN
LBS
LBS
LBS LBS
UNF
S006 3000 6.1 3.21 11.1 2.5 54 1.94 -1.37 -1.14 -0.91 0.750-14 NPSM
S009 3000 8.2 4.38 9.3 4.5 72 2.60 -2.00 -1.69 -1.39 0.750-14 NPSM, M18 x 1.5
S13S 3000 13.2 4.38 13.1 6.0 116 4.18 -1.71 -1.21 -0.72 0.750-14 NPSM
S019 3000 19.9 4.38 18.6 8.2 175 6.30 -1.38 -0.64 0.11 0.750-14 NPSM
S027 3000 27.6 5.25 18.0 11.5 242 8.73 -1.43 -0.39 0.65 0.750-14 NPSM
S030 3000 30.0 4.88 21.9 11.6 263 9.48 -1.02 0.11 1.23 0.750-14 NPSM
S040 3000 40.0 5.25 24.6 15.3 350 12.62 -0.70 0.80 2.30 0.750-14 NPSM
S050 3000 48.4 6.89 19.0 21.2 424 15.29 -2.27 -0.46 1.36 0.750-14 NPSM
S063 3000 63.0 7.25 21.9 26.7 552 19.90 -2.16 0.20 2.56 0.750-14 NPSM
S072 3000 69.6 6.89 26.0 28.5 610 22.00 -1.39 1.23 3.84 0.750-14 NPSM
S808 3000 78.2 8.00 22.9 35.2 685 24.70 -3.66 -0.73 2.20 0.750-14 NPSM, M25 x 2.0
S080 3000 77.4 7.25 26.1 31.4 678 24.45 -1.40 1.50 4.40 0.750-14 NPSM, M25 x 2.0
S80N (NB80) 3300 77.4 7.25 25.8 35.4 630 22.72 -5.75 -2.85 0.05 0.750-14 NPSM
S092 3200 89.8 8.00 24.8 37.5 750 27.04 -3.54 -0.17 3.20 0.750-14 NPSM
S100 3300 98.8 8.00 26.2 41.0 804 28.99 -4.35 -0.64 3.06 0.750-14 NPSM, M25 x 2.0
S85W 4350 83.8 7.39 21.5 28.5 540 19.47 -5.10 -1.90 1.26 0.875-14UNF-2B
S106W 4350 105.2 7.39 26.1 33.8 678 24.45 -4.84 -0.90 3.10 0.875-14UNF-2B

TEKDIV Stage bottle kit

Stage Rigging KitDIR rigged and ready to go! 

Our kit comes with the following:

- 40/80 CF Luxfer Aluminum Tank w/DIN valve
- Oceanic Tech Reg w/40" LP hose
- Scubapro Mini SPG w/6" HP hose
- Halcyon Stage Rigging kit complete with all hardware
- and your choice of MOD decals

All relevant components are prepared for Oxygen use up to 100%

 Stage Bottle Marking Decals

 

FREE SHIPPING
For Complete Pricing information click here

 

Copyright © 2006 TEKDIV Exploration
 Email: sales@tekdiv.com Phone: (514) 862-0274

This page was last updated 02/17/07

Dive Shop
Training
Expeditions
Forum
Information